SCCY Industries CPX-3

By - Posted: Thursday, December 17, 2015 - 3 Comments

SCCY CPX-3 right side photoUsers’ Rating

Rating: 4.0/10. From 132 votes.
Please wait...
Summary: The description, specs, photos, pricing and user ratings for the SCCY Industries CPX-3 pistol.

Manufacturer’s Description

The SCCY CPX-3 is a subcompact semiauto pistol built on a Zytel polymer frame with a stainless steel slide cut from round bar stock, and chambered in .380 ACP. Other features include:

  • The Roebuck Quad-Lock system, an enhanced locked breech system that locks the barrel at four points (two rear, two front) before each shot for accuracy;

    SCCY CPX-3 right side photo

    The CPX-3 from the right.

  • a stainless steel, broach-rifled barrel;
  • five grasping grooves at the slide’s rear;
  • laser-etched grooves on top of the slide to reduce glare and lead your eyes to the target;
  • a finger-groove grip;
  • either 1) a three-dot sight system, including a steel, windage-adjustable rear sight with a locking screw; or 2) a red dot sight (new, see photo below);
  • a double-action-only firing system that includes an internal hammer with an inertial firing pin to prevent accidental discharge if dropped, a 6–7-lb. trigger pull and double-strike capability;
  • no manual safety;
  • two staggered 10-round magazines with a finger extension base installed on each.

SCCY Firearms carry a lifetime warranty that stays with the gun, not with the owner. SCCY says its pistols are manufactured and assembled in the USA.

The Specs

Caliber Capacity BBL OAL Width Height Weight
.380 ACP 10+1 2.96″ 5.7″ 1.26″ 4.9″ 15 oz.

Pricing

MSRP: $305

More Photos

SCCY CPX-3 left side photo

The CPX-3 from the left.

SCCY CPX3 red dot sight photo

The CPX-3 with the red dot sight.

3 thoughts on “SCCY Industries CPX-3

  1. Roger

    Can’t wait to try SCCY CPX 3. Let me know when they are available.

    0
    Be the first one to like this.
    Please wait...
    Reply
  2. Chuck

    They must be difficult to manufacture since they were expected to start shipping in the spring!

    0
    Be the first one to like this.
    Please wait...
    Reply
  3. Robert Clinkenbeard

    Bought gun 6 months ago. Still no release date. Any idea?

    0
    Be the first one to like this.
    Please wait...
    Reply

Leave a Reply to Roger Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of followup comments via e-mail. You can also subscribe without commenting.